Pure Light LED Light System - Serenity Plus Pneumatic
Ilumminex LED light + 20 bullet Lights
Serenity Plus Pneumatic Kit - PureLight Illuminex Light inc Controller + 20 bullet Lights
Our Serenity Plus Pneumatic lighting kit includes all you need to fit a main Illuminex Light with Controller + 20 waterline bullet lights to any spa, hot tub or bath, which can be used with air buttons for control.
This simple but effective kit does not require a separate controller as all the lights/colour change options are controlled by a main Illuminex Light which has its own on board control. The system is controlled by switching the power source on/off via a top side mounted air button.(not supplied)
Perfect for adding some mood lighting to your spa or bath.
Serenity Kit Includes
- 1x Illuminex Light with Controller
- 1x Single function pneumatic control box
- 1x 12v Transformer (for 240v control boxes if required)
- 1 x Bulb housing for Illuminex Light
- 5x Quad RGB daisy chain assembly bullet lights
- 20x Frosted Bullet lenses
- 20x Rear nylon nuts (fix lens to shell)
- 20x Lens O-rings (seal lens to shell)
- 20x Compression nuts & O-rings (secure LED into lenses)
Light Kit Features
- Variety of colours, including Cyan, Yellow, Strobe, Red, Blue, White, Magenta, Green
- Selectable "On Board" colour-controller that can control up to 20 waterline bullet lights
- 12v AC light output
- Moisture Proof
- Can be used with any 12 volt supply control system
- Compatible with all PureLight lighting system
Note
- Tools, Air button & Air hose are not supplied with this Kit.
- We recommend the Transformer be housed in a water tight enclosure (not supplied)
- Product Images my differ slightly to products supplied
Power supply
- Input 230V/50Hz
- Output 11.5V AC~4A
Daisy Chain Single Points of LED - 4 RGB (Quad) with Extra Long Leads (x5)
- Typical Max current: 80mA
- Connector Cable length: 1930mm
- LED cable inner/outer length: 610mm / 915mm
Illuminex Light inc Controller
- Input 12 VAC/12 VDC; Output 12 V, 1 A Max
Typical Current (nonload) = 100mA
Typical Current (with max load) = 750 mA
| Colour Modes | ||
|---|---|---|
| Cycle # | Colour Mode | Description |
| 1 | White | Red, Green, and Blue ON (White) |
| 2 | Red | Only Red ON |
| 3 | Green | Only Green ON |
| 4 | Blue | Only Blue ON |
| 5 | Red/Green | Only Red and Green ON |
| 6 | Red/Blue | Only Red and Blue ON |
| 7 | Green/Blue | Only Green/Blue ON |
| 8 | Slow Colour Wheel | LEDs change colour - very slowly( 30 seconds ) from: Green/BlueBlue/RedRed/Green |
| 9 | Colour Flash | LEDs change colour every few seconds from: Blue/Green Red/Blue Blue Red/Green Green Red |
| 10 | Colour Wheel | LED gradually changes (6 seconds) colour from: Green/Red Red/Blue Blue/Green |
Important Information:
Our ranges must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
